Bobay Stack

Ops & troubleshooting / 2026-06-21

Hard Drive Died Three Months Early: Which SMART Numbers to Watch

Not all SMART attributes matter. Five metrics plus their trends tell you far more than a "health status: OK" line ever will.

4 MIN READ BY BOBAY.TOP Updated 2026-06-26 ↖ All notes
Hard Drive Died Three Months Early: Which SMART Numbers to Watch

smartctl -H tells you "PASSED", and two weeks later the drive drops off. That's not the tool's fault — you only looked at the verdict, not the trend.

The five attributes that actually matter

IDNameMeaningWarning sign
5Reallocated_Sector_CtReallocated sectorsAny non-zero value that keeps growing
187Reported_UncorrectUncorrectable errorsNon-zero
197Current_Pending_SectorSectors pending remapNon-zero
198Offline_UncorrectableOffline uncorrectableNon-zero
199UDMA_CRC_Error_CountTransport-layer checksum errorsGrowth usually means a cable or backplane problem

The first four are the drive itself; the fifth usually isn't the drive's fault — a loose SATA cable or a poor backplane contact will push 199 up. Swap the cable first, then look at the drive — that can save you the price of a disk.

# Save a baseline, then compare weekly
smartctl -A /dev/sda > /var/lib/smart/$(date +%F).txt

If attribute 5 goes from 0 to 8 and then to 24, it's time to prepare for that drive. "Currently 24" means nothing on its own; "up 24 in three months" does.

Temperature counts too: for mechanical drives sitting above 50°C long-term, the lifetime curve gets noticeably steeper. Case airflow matters more than noise.

Two extra for SSDs

  • Percentage Used (NVMe): the vendor's lifetime estimate, more intuitive than TBW
  • Wear_Leveling_Count (SATA): if the average drops fast, write amplification is severe

Consumer SSDs running containers on PVE usually have their write volume underestimated. Convert Data Units Written from smartctl -a into actual TBW consumption — more reliable than looking at the rated figure.

Turning it into monitoring

The simplest approach is cron plus a script that notifies you on anomalies:

#!/usr/bin/env bash
for d in /dev/sd? /dev/nvme?n1; do
  smartctl -H "$d" | grep -q PASSED || echo "ALERT $d" | mail -s "disk" [email protected]
done

Checking only PASSED will miss drives that are "degrading but not yet failed". To really catch them early, you still have to watch how those five numbers change.

Five metrics worth watching

MetricThreshold referenceMeaning
Reallocated_Sector_Ct>0 and steadily growingBad sectors already present
Current_Pending_Sector>0Some sectors can't be read and are waiting to be remapped
Offline_Uncorrectable>0Confirmed unrepairable
Wear_Leveling_CountSSD life percentageRemaining life
Temperature_CelsiusMechanical drives >50°CCooling problem

If any of the first three is non-zero, schedule a replacement rather than "let's watch it a bit longer". When Current_Pending_Sector goes from 0 to 1 to 2, the drive often drops off within a few weeks.

A usable inspection script

for d in /dev/sd[a-z]; do
  echo "== $d =="
  smartctl -A -H "$d" | grep -E "Reallocated|Pending|Uncorrectable|Temperature|Power_On_Hours"
done

-H prints the overall health verdict (PASSED/FAILED), -A prints the attribute table. Looking only at -H will miss drives that "still PASSED but are already degrading".

Writing it as automation

#!/bin/bash
bad=$(smartctl -A /dev/sda | awk '/Current_Pending_Sector|Offline_Uncorrectable/{if($10+0>0) print $2":"$10}')
[ -n "$bad" ] && echo "SMART WARN $(hostname): $bad" | mail -s "disk warning" [email protected]

The key is to report only non-zero values: a daily "all good" email gets filtered out after three days, and then you can't see the real failure.

A common misjudgment

USB external enclosures often can't read SMART (you need smartctl -d sat). Not being able to read it doesn't mean there's no problem, and it doesn't mean the drive is bad — the protocol bridge simply doesn't forward it. In that case you can only judge by I/O errors in dmesg and a drop in read/write throughput.

One more: for a mechanical drive with over 30,000 power-on hours and long-term temperatures above 50°C, replace it even if SMART is all green — its failures tend to be sudden, not gradual.

SMARTHard DriveMonitoring

References

smartmontools documentation ↗ Backblaze hard drive stats ↗